Technical Diploma
This program is designed to prepare students to work as a Pipefitter. There are some who may consider pipefitting synonymous with plumbing, but these are really two very distinct trades. Plumbers install and repair the water, waste disposal, drainage, and gas systems in homes and commercial and industrial buildings. Pipefitters, on the other hand, install and repair both high- and low-pressure pipe systems used in manufacturing, in the generation of electricity, and in the heating and cooling of buildings. This program covers four levels of training based on curriculum developed by the National Center for Construction Education and Research (NCCER). NCCER offers a four-level Pipefitting curriculum that covers topics such as Threaded Pipe Fabrication, Excavations, and Steam Traps. Students who successfully complete the program will be nationally certified by NCCER.
A career and technical certificate (CTC) may be earned in the first semester and a certificate of technical studies (CTS) may be earned in the second semester; a technical diploma may be earned upon completion of all technical courses. Students also have the option to complete the Technical Studies Associate of Applied Science with a concentration in Pipefitting by completing General Education courses in addition to the technical courses.
- Complete the program of study outlined below.
- Earn a “C” or better in all courses required for the completion of the program.
Program Outcomes
- Demonstrate proper use of pipefitting tools.
- Fabricate piping systems through welding and machining processes.
- Employ safe rigging practices and hazard identification to assemble a piping system.
- Perform maintenance on piping systems and components.
| Course Code | Course Title | Credit Hours |
|---|---|---|
| CORE 1003 | Introduction to Craft Skills | 3 |
| PIPE 1119 | Pipefitting Level 1 | 9 |
| PIPE 1216 | Pipefitting Level 2 Part 1 | 6 |
Semester Total: 18
| Course Code | Course Title | Credit Hours |
|---|---|---|
| PIPE 1226 | Pipefitting Level 2 Part 2 | 6 |
| PIPE 1316 | Pipefitting Level 3 Part 1 | 6 |
| PIPE 1326 | Pipefitting Level 3 Part 2 | 6 |
Semester Total: 18
| Course Code | Course Title | Credit Hours |
|---|---|---|
| PIPE 1419 | Pipefitting Level 4 | 9 |
Semester Total: 9
Total Program Credit Hours: 45
Pipefitting Credentials Available:
| Course Code | Course Title | Credit Hours |
|---|---|---|
| CORE 1003 | Introduction to Craft Skills | 3 |
| PIPE 1119 | Pipefitting Level 1 | 9 |
CTC: NCCER Pipefitting Level 1: 12
| Course Code | Course Title | Credit Hours |
|---|---|---|
| CORE 1003 | Introduction to Craft Skills | 3 |
| PIPE 1119 | Pipefitting Level 1 | 9 |
| PIPE 1216 | Pipefitting Level 2 Part 1 | 6 |
| PIPE 1226 | Pipefitting Level 2 Part 2 | 6 |
CTS: NCCER Pipefitting Level 2 (Level 1 and Level 2 courses): 24
| Course Code | Course Title | Credit Hours |
|---|---|---|
| CORE 1003 | Introduction to Craft Skills | 3 |
| PIPE 1119 | Pipefitting Level 1 | 9 |
| PIPE 1216 | Pipefitting Level 2 Part 1 | 6 |
| PIPE 1226 | Pipefitting Level 2 Part 2 | 6 |
| PIPE 1316 | Pipefitting Level 3 Part 1 | 6 |
| PIPE 1326 | Pipefitting Level 3 Part 2 | 6 |
| PIPE 1419 | Pipefitting Level 4 | 9 |
TD: NCCER Pipefitting Level 4 (Level 1, Level 2, Level 3, and Level 4 courses): 45
Students interested in pursuing the Technical Studies Associate of Applied Science degree with a concentration in Pipefitting should contact the Technical Education Division at 225-216-8367 for more information.